When the AC itself, which provides relief from the heat, becomes a problem…? In the summer season, when the mercury rises, cases of AC blasts become more frequent, especially on the upper floors, more cases of blasts are seen. But have you ever wondered why there are more incidents of AC explosions on the upper floors as compared to the lower floors? There can be many reasons for AC bursting, but one of the major reasons for the occurrence of AC bursting on upper floors can be Heat Exposure or we can say Extreme Heat.
First reason: extreme heat
They say that on the upper floors one feels more heat and more cold, and this is not said just like that. Compared to the lower floors, the upper floors receive direct and intense sunlight due to which the top floors become hotter than the lower floors. to cool your room AC The AC compressor has to exert double the power due to which the AC may overheat and explode.
Second reason: poor maintenance
Many people are careless in maintenance and do not get the AC serviced on time and do not remove and clean the filters every 10 to 15 days, due to which there is more pressure on the AC. Due to this pressure the AC may burst.
Third reason: Voltage fluctuation (electrical load)
In the summer season, when AC starts running in every house, the problem of voltage fluctuation starts increasing. Rapid fluctuations can have a negative impact on the compressor and system of the AC, which can increase the risk of the AC bursting.
Fourth reason: bad wiring
If the upper floors are too hot, then the AC also runs for a longer time, in such a situation, if the wiring of the AC is cut somewhere or is very old, then it can increase the risk of sparking and fire.
Ways to avoid accidents
First solution, regular servicing: If you want that the incident of blast in AC does not happen to you, then for this you will have to take special care of some important things. The first important thing is to get the AC serviced on time so that at the time of washing the AC, whatever dust and dirt has accumulated in the compressor gets removed and the AC gets cleaned from inside. Apart from this, talk to the technician and get the AC thoroughly checked to see whether any connection is loose or whether the gas is leaking.
Second solution, keep the outdoor unit in the shade: If you have a split AC, then install the outdoor unit at a place where there is no direct sunlight. In such a situation, the compressor will not have to bear the brunt of direct sunlight.
Third solution, don’t run continuously: It is true that the upper floors are very hot so people keep the AC running non-stop for hours, but do not make the mistake of running the AC non-stop for 12-13 hours. Firstly, due to the high temperature on the upper floor, running it non-stop from above will cause the compressor to overheat, which can increase the risk of the AC bursting.
Fourth solution, placement of the outdoor unit: Never keep the outdoor unit at a place where the hot air coming out of the compressor does not have space to escape. There should not be anything in front of the compressor which may obstruct the flow of air.
Read this also- Phone with 6000mAh battery-50MP camera launched, competing with Vivo-Redmi!
Leave a Reply